Instruments - fitted in center

lower parcel shelf - black

lower parcel shelf

cover to body

for chrome mouldung

demister - chrome

demister - black

retaining bezel

chromed

Standard Mini

with cover

Cooper

for casing - plastic

848 cc Standard, Van, Pick-up

if speedometer only

speedometer and gauges

1962 on, except 848 cc Standard, Van, Pick-up

only if 3 gauges

speedometer casing

1962 on, except 848 cc Standard, Van, Pick-up

only if 3 gauges

chrome bezel

1962 on, except 848 cc Standard, Van, Pick-up

only if 3 gauges

retaining casing speedo to inner bulkhead

retaining casing speedo to inner bulkhead

retaining casing speedo to inner bulkhead

retaining casing speedo to inner bulkhead

RHD only

retaining casing speedo to inner bulkhead

RHD only

SN4421-01SA with fuel guage - new speedo with 125 mm diameter, black surface with white illumination and chrome bezel. Range: 0-140 KP/H, final ratio 3.44:1, turns: 780, mode of operation: mechanical

models with 10" wheels and centre mounted instruments (1959-84)

SN4421-00SA with fuel guage - new speedo with 125 mm diameter, black surface with white illumination and chrome bezel. Range: 0-90 MP/H and 0-150 KP/H, final ratio 3.44:1, turns: 1248, mode of operation: mechanical

Mini with 10" wheels and centre mounted instruments (1959-84)

mechanical, 125 mms, black with white printing and clear glass, chrome bezel, range: 0-140 KM/H

for final ratio 3.76:1

mechanical, 125 mms, black with white printing and clear glass, chrome bezel, range: 0-90 MPH

for final ratio 3.76:1

mechanical 200 MP/H speedo SN4421-33. New item with 125 mm diameter, black surface with white illumination and chrome bezel. Turns: 800, final ratio 3.44:1

Cooper S with 10" wheels (1963-80)

SN4421-32 with fuel guage - new speedo with 125 mm diameter, black surface with white illumination and chrome bezel. Range: 0-130 MP/H and 0-200 KM/H, final ratio 3.44:1, turns: 1280, mode of operation: mechanical

Cooper S with 10" wheels and centre mounted instruments (1963-71)

mechanical, 125 mms, magnolia with black printing and clear glass, chrome bezel, range: 0-200 KM/H

for final ratio 3.44:1, Cooper S

SN4421-62 with fuel guage - new speedo with 125 mm diameter, magnolia surface with black illumination and chrome bezel. Range: 0-130 MP/H and 0-200 KM/H, final ratio 3.44:1, turns: 1280, mode of operation: mechanical

Cooper S with 10" wheels and centre mounted instruments (1963-71)

in speedometer - black

BF6108/00. In the speedometer integrated gauge with black dial and hanging pointer, range: E-1/2-F - reconditioned, in exchange

fitted to back side of speedo - positive earth

MK1

serial number: BR1309/00

fitted to back side of speedo - negative earth

MK2 on

serial number: BR1310/00

speedometer - 26" standard length

30" length - over length

alternative, easy fitting

electrical auxiliary gauge with 52 mm diameter and chrome bezel. Black dial with white illumination and clear glass, overhead pointer with C-N-H range. Requires temperature sensor and voltage stabiliser

3 gauge models except 848 cc standard, Van and Pick-up (1962-80)

auxiliary gauge with 52 mm diameter and chrome bezel. Magnolia dial with white illumination and clear glass, overhead pointer with C-N-H range. Requires temperature sensor and voltage stabiliser

only if 3 gauges

coolant - variant with spade connector

not Cooper S upto 1971

if fitted

with spade connector

Cooper S upto 1971

if fitted

PL2310-00 - mechanical operated auxilary gauge with 52 mm diameter, black dial with clear glass and chrome bezel, range: 0-100 lbs/sqare inch and 0-7 Kg/qcm

models with 3 gauges (1959-80)

PL2328-04C - mechanical operated auxilary gauge with 52 mm diameter, magnolia dial with clear glass and chrome bezel, range: 0-100 lbs/sqare inch and 0-7 Kg/qcm

models with 3 gauges (1959-80)

to gauge - cooper

only if 3 gauges

1/8” x 28 BSP - use with solder nipple 214605 for 1/8" pipe

only if 3 gauges

sealing oilpipe to instrument

only if 3 gauges

between the oil pipes - length: 14.5"

3 gauge models (1962-80)

worm type with 9 mm width - for hoses with 12-14 mm outer diameter

only if 3 gauges

nylon, engine to oil pressure gauge, length: 5"

alternative, only if 3 gauges

Bulkhead at speedo (rota-dip hole)

(1969-89)