RetroSound® Radio
Model 'Grand Prix' - retro radio with fascia in the typical 80s look with all accessories and many modern extras
The premium model "Grand Prix" from RetroSound with many accessories.
In the classic design of the 80s, it has modern features including DAB+ reception, USB input on the back of the unit, Bluetooth functions, preamplifier outputs and multicolour lighting.
Features in detail:
• DAB+ digital radio
• FM radio with RDS functions
• A2DP Bluetooth audio playback for wireless smartphone integration
• USB input on the back of the unit
• AUX input (3.5mm) on the rear of the unit
• Bluetooth hands-free kit with external microphone
• Preamplifier outputs for external power amplifiers (front/rear)
Contents of delivery:
• DAB radio module with DAB+ and VHF
• GRAND PRIX display unit
• ISO installation kit for DIN slot
• DAB1 antenna splitter
• USB/AUX built-in socket with 60cm cable
• USB stick with 4GB memory
Equipment:
• Playback of MP3 and WMA files via the rear USB input
• Bluetooth hands-free kit with A2DP audio streaming
• Adjustable LCD lighting with 32,000 different colours
• DAB+/UKW/MW radio receiver with RDS and 30 station presets
• Tuner with European even and odd radio frequencies
• Integrated 4-channel amplifier (4 x 25 watts RMS)
• 2 stereo RCA outputs for external amplifiers (front/rear)
• 3 equaliser programmes plus individual bass/treble/fader/balance adjustment
• XBAS loudness function
• Non-volatile memory
Expansion options:
• USB input (rear of unit) up to max. 32GB
• AUX input (stereo)
• 2 Cinch outputs (stereo) for external amplifiers (front/rear)
• Separate switch-on line for motor aerial and amplifier
Technical data Radio section:
• FM European broadcasting Frequency range 87.5-107.9 MHz. (0.05 MHz. in steps)
• MW frequency range 530-1710 kHz (9 kHz. in steps)
• DAB+ reception via SMB antenna input for passive DAB+ antennas.
General data:
• Dimensions of basic radio unit 101x51x136mm
• Power supply 10.5 to 14.4 volts
• Maximum current consumption 15 amps
• Quiescent current 3.5 mA
• Sinusoidal output power 12V, 4 Ohm, <1% distortion: 4x25 Watt (RMS)
• Loudspeaker impedance 4-8 Ohm
• Cinch outputs 6 channel 2.85 volts for external amplifiers (front/rear)
• Input sensitivity AUX1 >300 mV / 6 kOhm
• Input sensitivity AUX2 >300 mV / 6 kOhm
E-approval:
• e13 03 10006 e13*72/245*2006/96*10006*00
Antenna connection:
In most classic vehicles, passive rod or telescopic antennas were installed. These are also suitable for DAB+ radio reception. A DAB1 antenna splitter is included in the set. With windscreen antennas or electronically amplified roof antennas, you must install a separate DAB+ antenna and cannot use the DAB1.