Accelerator pedal with linkage and choke cable - TR5, TR6 P.I. to September 1972
longer version with flexible wire, may replace original choke cable - characteristic: knob with 'choke' pictorial. Cable length: 41.3/4" and 49.1/4"
Benodigd: 1
Benodigd: 1
cable operated fast idle
Benodigd: 1
choke cable
TR6 from engine no. CP50001
Benodigd: 1
with 7/16" inner diameter
Fast idle cam to bracket
Benodigd: 1
Fast idle cam to bracket
Benodigd: 1
with 5/16" inner diameter
Fast idle cam to bracket
Benodigd: 1
return spring to inner wing
Benodigd: 1
accelerator cable through hole in dash shelf
Benodigd: 1
accelerator cable an RH inner wing
Benodigd: 1
TR5, TR6 to engine no. CP26998
Benodigd: 1
TR6 from engine no. CP50001
Benodigd: 1
for throttle stop adjusting screw
Benodigd: 1
securing throttle linkage to inlet manifold
Benodigd: 2
Throttle linkage and choke cable bracket to inlet manifold
Benodigd: 6
Throttle linkage and choke cable bracket to inlet manifold
Benodigd: 6
throttle linkage to inlet manifold
TR5, TR6 to engine no. CP26804
Benodigd: 3
control rod, upper
TR5, TR6 to engine no. CP26804
Benodigd: 3
with joints - throttle linkage to inlet manifold
TR6 from engine no. CP26805.
May replace all earlier versions
Benodigd: 3
control rod, upper
TR6 from engine no. CP26805.
May replace all earlier versions
Benodigd: 3
control rod, lower
TR6 from engine no. CP26805.
May replace all earlier versions
Benodigd: 3
TR6 from engine no. CP26805.
May replace all earlier versions
Benodigd: 9
TR6 from engine no. CP26805.
May replace all earlier versions
Benodigd: 6
TR6 from engine no. CP26805.
May replace all earlier versions
Benodigd: 6
upper joint
TR6 from engine no. CP26805.
May replace all earlier versions
Benodigd: 3
LHD
Benodigd: 1
accelerator cable to battery retaining bar
LHD
Benodigd: 1
pedal shaft
LHD
Benodigd: 1
accelerator pedal shaft
RHD
Benodigd: 1
