Interior dos carburadores SU-HS6 - BJ7
with piston for SU-H6 and HS6 carburettors
Necessário: 2
fixed type - marked: BC, standard
Necessário: 2
fixed type - marked: RD, rich
Necessário: 2
assembly. For SU-HS carburettors with fixed metering needle
Necessário: 2
front carburettor - identification: orange marking
Contains illustrations 19 to 22
Necessário: 1
rear carburettor - identification: yellow marking
Contains illustrations 19 to 22
Necessário: 1
throttle spindle. For bodies with worn cast in bushes, useable on SU and Zenith Stromberg carburettors with 5/16" throttle spindle
For bodies with worn cast in bushes
Necessário: 4
for SU carburettors - bore: 0.096"
Necessário: 2
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
Superior replacement of needle valve and seat
Necessário: 2
for SU HS type carburettor - uprated 'unsinkable' type, made from closed cell Nitrile rubber foam, resistant to modern ethanol based fuels
Necessário: 2
made from nitrile rubber. Inner diameter: 5/16", outer diameter: 1/2", braided with zinc plated wire
Braided with zinc plated wire
Necessário: 1
rear carburettor
Necessário: 1
throttle return lever and throttle spindle
Necessário: 2
choke lever guide - complete kit with sleeve and washers
Necessário: 2
front carburettor - supplied in pairs
Necessário: 1
rear carburettor - supplied in pairs
Necessário: 1
with link, front carburettor - original type
Alternatives
Necessário: 1
with link, front carburettor - replacement
Alternatives
Necessário: 1
with link, rear carburettor - original type
Alternatives
Necessário: 1
with link, rear carburettor - replacement
Alternatives
Necessário: 1
front carburettor
Necessário: 1
rear carburettor
Necessário: 1
for two SU-HS6 type carburtettors
Necessário: 1
for two SU-HS6 type carburettors. Comprising service kit plus throttle discs and throttle spindles
Comprising service kit 214284 plus throttle discs and throttle spindles
Necessário: 1
for SU-H4 carburettors. Chromed with 78 mm total height
Construction height: 78 mm
Necessário: 2
for SU-HS4 and HS6 carburettors. Chromed with 71 mm total height
Construction height: 71 mm
Necessário: 2