Bonnet and engine bay fittings 3.8 Series 1 (late), 4.2 Series 1, Series 1.5 plus Series 2 (1962-1970)
bonnet hinge - aluminium variant with 0.128" thickness
bonnet hinge - aluminium variant with 0.036" thickness
bonnet hinge - aluminium variant with 0.064" thickness
bonnet hinge - steel variant with 0.036" thickness
bonnet hinge - steel variant with 0.064" thickness
bonnet hinge - steel variant with 0.128" thickness
RH
3.8 and 4.2 Series 1 and Series 2 OTS to 1R1188 (RHD) and 1R9570 (LHD), FHC from 1R20270 (RHD) and 1R26387 (LHD) and 2+2 from 1R35353 (RHD) and 1R42118 (LHD) (1961-1969)
Necessário: 1
LH
3.8 and 4.2 Series 1 and Series 2 OTS to 1R1188 (RHD) and 1R9570 (LHD), FHC from 1R20270 (RHD) and 1R26387 (LHD) and 2+2 from 1R35353 (RHD) and 1R42118 (LHD) (1961-1969)
Necessário: 1
bonnet prop rod
3.8 and 4.2 Series 1 and Series 2 OTS to 1R1188 (RHD) and 1R9570 (LHD), FHC from 1R20270 (RHD) and 1R26387 (LHD) and 2+2 from 1R35353 (RHD) and 1R42118 (LHD) (1961-1969)
Necessário: 2
3.8 and 4.2 Series 1 and Series 2 OTS to 1R1188 (RHD) and 1R9570 (LHD), FHC from 1R20270 (RHD) and 1R26387 (LHD) and 2+2 from 1R35353 (RHD) and 1R42118 (LHD) (1961-1969)
Necessário: 4
3.8 and 4.2 Series 1 and Series 2 OTS to 1R1188 (RHD) and 1R9570 (LHD), FHC from 1R20270 (RHD) and 1R26387 (LHD) and 2+2 from 1R35353 (RHD) and 1R42118 (LHD) (1961-1969)
Necessário: 4
3.8 and 4.2 Series 1 and Series 2 OTS to 1R1188 (RHD) and 1R9570 (LHD), FHC from 1R20270 (RHD) and 1R26387 (LHD) and 2+2 from 1R35353 (RHD) and 1R42118 (LHD) (1961-1969)
Necessário: 4
3.8 and 4.2 Series 1 and Series 2 OTS to 1R1188 (RHD) and 1R9570 (LHD), FHC from 1R20270 (RHD) and 1R26387 (LHD) and 2+2 from 1R35353 (RHD) and 1R42118 (LHD) (1961-1969)
Necessário: 1
3.8 and 4.2 Series 1 and Series 2 OTS to 1R1188 (RHD) and 1R9570 (LHD), FHC from 1R20270 (RHD) and 1R26387 (LHD) and 2+2 from 1R35353 (RHD) and 1R42118 (LHD) (1961-1969)
Necessário: 1
reaining safty catch bracket
Necessário: 2
with hook and escutcheon, RH side
Necessário: 1
with hook and escutcheon, LH side
Necessário: 1
bonnet locking hook - with escutcheon assembly
Necessário: 2
bonnet, including locking cams and operating rods
Necessário: 1
on bracket engaging locking hook on bonnet side panel
Necessário: 2
á frente. Kit completo com dobradiça et pendural
Necessário: 1
retaining number plate backing
Necessário: 2
for rubber seal between bonnet L/H valance and front frame side member
Necessário: 1
for rubber seal between L/H rear diaphragm and front frame side member
Necessário: 1
bonnet
4.2 Series 2 OTS from 1R1189 (RHD) and 1R9571 (LHD), FHC from 1R20271 (RHD) and 1R26388 (LHD) and 2+2 from 1R35354 (RHD) and 1R42119 (LHD) (1969-1970)
Necessário: 1
gas strud
4.2 Series 2 OTS from 1R1189 (RHD) and 1R9571 (LHD), FHC from 1R20271 (RHD) and 1R26388 (LHD) and 2+2 from 1R35354 (RHD) and 1R42119 (LHD) (1969-1970)
Necessário: 2
locking pin gas strud
4.2 Series 2 OTS from 1R1189 (RHD) and 1R9571 (LHD), FHC from 1R20271 (RHD) and 1R26388 (LHD) and 2+2 from 1R35354 (RHD) and 1R42119 (LHD) (1969-1970)
Necessário: 2
