Radiators and radiator hoses - LHD 4.2 Series 1.5 and all Series 2
new item with high efficiency core
4.2 Series 1.5 LHD with manual transmission from 1E15980 (OTS), 1E34583 (FHC) and 1E77709 (2+2) plus all Series 2 with manual transmission (1967-70)
Necessário: 1
with standard copper core - reconditioned, in exchange
4.2 Series 1.5 LHD with manual transmission from 1E15980 (OTS), 1E34583 (FHC) and 1E77709 (2+2) plus all Series 2 with manual transmission (1967-70)
Necessário: 1
alloy, lightweight type with high efficiency core
4.2 Series 1.5 LHD with manual transmission from 1E15980 (OTS), 1E34583 (FHC) and 1E77709 (2+2) plus all Series 2 with manual transmission (1967-70)
Necessário: 1
exchange item with standard copper cord
4.2 Series 1.5 LHD with automatic transmission from 1E77709 (2+2) plus all Series 2 with automatic transmission (1968-70)
Necessário: 1
alloy, lightweight type with high efficiency core
4.2 Series 1.5 LHD with automatic transmission from 1E77709 (2+2) plus all Series 2 with automatic transmission (1968-70)
Necessário: 1
radiator - variant without breather with 58 mm diameter
Necessário: 1
radiator - two piece kit, complete with rubber pads and distance tubes
Necessário: 1
retaining bracket to radiator
Necessário: 2
retaining strut to bracket
Necessário: 2
stainless steel - under radiator
Necessário: 1
fan motor. Variant with single spade terminal. Switches on at 86 C° and off at 74 C°
Necessário: 1
fan motor. Variant with single spade terminal. Switches on at 90 C° and off at 80 C°
Necessário: 1
fan motor. Variant with twin spade terminal
Necessário: 1
fan motor. Complete unit with gasket and twin spade connector
Necessário: 1
engine cooling system. Steel version, finished in black. Fitted on bulkhead
Necessário: 1
heater motor to bracket
per bracket
Necessário: 8
retaining bracket heater motor to fan cowl
Necessário: 6
retaining bracket heater motor to fan cowl
Necessário: 6
tailor made kit with brackets, fan cowl and fitting material. For negative earthed cars only!
Necessário: 1
tailor made kit with brackets, temperature contoler with loom, hoseclamps and fitting material. For negative earthed cars with original copper brass factory fitted radiator only! These twin 10" high power sucking fans must be fitted behind the radiator
Necessário: 1
retaining cowl to radiator
Necessário: 6
top - with fabric interlayer for reinforcement
Necessário: 1
worm type. Retaining hose to expansion tank an radiator
Necessário: 2
water pump to water pipe
All Series 2 except RHD models with power steering
Necessário: 1
between radiator and water pump
All Series 2 except RHD models with power steering
Necessário: 1
bottom - to water pump
All Series 2 except RHD models with power steering
Necessário: 1
worm type. Water pipe to hose
All Series 2 except RHD models with power steering
Necessário: 2
bottom - to water pump
Series 2 RHD models with power steering
Necessário: 1
worm type. Retaining hose to water pump
Necessário: 1
for rubber bush
not quite original
per side
Necessário: 2
expansion tank
Necessário: 1
retaining bracket expansion tank
LHD models
Necessário: 3
retaining bracket expansion tank
RHD models
Necessário: 3
retaining bracket expansion tank
RHD models
Necessário: 3
Kevlar reinforced
Series 1.5 LHD and all Series 2 except RHD models with power steering
Necessário: 1
Kevlar reinforced
Series 2 RHD models with power steering
Necessário: 1
with fabric interlayer for reinforcement
Series 1.5 LHD and all Series 2 except RHD models with power steering
Necessário: 1
made of high quality silicone. Set with 12 lines incl. heater hoses
Series 1.5 LHD and all Series 2 except RHD models with power steering
Necessário: 1
