Dynamo and control box - 3.8 Series 1 (1961-64)

C45 type - reconditioned, in exchange. Dimensions: shaft diameter: 17 mm, PCD of fixing holes: 137 mm, distance between mounting brackets (at the holes): 160 mm, housing diameter: 115 mm

3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)

Lucas C42 type - reconditioned, in exchange. Dimensions: shaft diameter: 15 mm, PCD of fixing holes: 145 mm, distance between mounting brackets (at the holes): 164 mm, housing diameter: 108 mm

3.8 Series 1 OTS from 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)

new item. Reproduction of the Lucas C42 type dynamo. Dimensions: shaft diameter: 15 mm, PCD of fixing holes: 145 mm, distance between mounting brackets (at the holes): 164 mm, housing diameter: 108 mm

3.8 Series 1 OTS from 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)

for Lucas C45 dynamo. Dimensions: 3/4 x 5/8" and 1/4" thick

3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)

for Lucas C42 dynamo

3.8 Series 1 OTS from 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)

commutator end bracket on Lucas C45 dynamo

3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)

commutator end bracket on Lucas C42 dynamo

3.8 Series 1 OTS from 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)

dynamo - runs with 1/2" fan belt

3.8 Series 1 from engine no. R1001 to R5249 (1961-63)

dynamo - variant for duplex type fan belt

3.8 Series 1 from engine no. R5250 (1963-64)

dynamo

3.8 Series 1 to engine no. R1509 (1961)

for Lucas C45 dynamo

3.8 Series 1 from engine no. R1510 (1961-64)

retaining pulley

3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)

retaining pulley

3.8 Series 1 OTS from 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)

retaining pulley

securing dynamo at bottom to mounting bracket

retaining dynamo to adjusting link

3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)

retaining dynamo to adjusting link

3.8 Series 1 OTS from 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)

retaining dynamo to adjusting link

3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)

retaining dynamo to adjusting link

3.8 Series 1 OTS from 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)

retaining dynamo to adjusting link

retaining dynamo to adjusting link

mounting dynamo

dynamo to engine

dynamo to engine

for Lucas C45 dynamo - exchange. RB310 type with 3 screw-in terminals and original cover

3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)

securing control box

3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)

securing control box

3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)

control box

3.8 Series 1 OTS to 850091 (RHD) and 875385 (LHD), FHC to 860004 (RHD) and to 885020 (LHD) (1961)

para os alternadores Lucas C42, C47 e C48 DC. Réplica do RB340 com 30 amperes

retaining control box

3.8 Series 1 OTS drom 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)

retaining control box

3.8 Series 1 OTS drom 850092 (RHD) and 875386 (LHD), FHC from 860005 (RHD) and 85021 (LHD) (1962-1964)

retaining bracket to vehicle

retaining bracket to vehicle