Hub, shock absorber and wishbone
rear suspension craddle - high quality aftermarket product
Necessário: 4
rear suspension craddle - high quality aftermarket product
Necessário: 4
drive shaft to differential
Necessário: 2
drive shaft, splined
Necessário: 2
drive shaft - greaseable type with 106.3 mm span width and 30.2 mm cup diameter
Necessário: 4
drive shaft - greaseable heavy duty type with 106.3 mm span width and 30.2 mm cup diameter
Necessário: 4
rear suspension. Variant without hole for ABS sensor
Necessário: 2
for outer oil seal at rear suspension
Necessário: 2
right hand rear, 52 mm
vehicles with wire wheels
Necessário: 1
left hand rear, 52 mm
vehicles with wire wheels
Necessário: 1
rear suspension
vehicles with disc wheels
Necessário: 2
rear hub
vehicles with disc wheels
Necessário: 10
inner trailing arm - this kit services one side of the vehicle
Necessário: 2
for the sealing ring of the inner trailing arm bearing
Necessário: 8
retaining trailing arm bracket - length: 7/8"
Necessário: 2
retaining trailing arm bracket - length: 3/4"
Necessário: 2
outer trailing arm - this kit services one side of the vehicle
Necessário: 2
rear shock absorber upper and lower mounting
Necessário: 4
rear shock absorber upper and lower mounting. Variant with inner sleeve
Necessário: 8
lower shock absorber mounting
Necessário: 2
rear coil spring - bottom. Dimensions: 56 mm ID and 80 mm OD
Necessário: 4
spring seat 'rear coil spring - 1 half. Fits to genuine Jaguar dampers only
Necessário: 8
da mola de amortecedor traseira - Uma metade. Funciona apenas com os amortecedores Limora 200448 e 1579
Necessário: 8
rear radius arm, rear. Uprated 'comfort' type
Necessário: 2
rear radius arm to trailing arm
Necessário: 2
rear radius arm, front - uprated 'comfort' type
Necessário: 2
1.7/8" x 7/16 UNF with hole for lock wire - radius arm bracket to chassis. Please note: must be used with thread lock at the point of assemble
Necessário: 2