Cylinder head and tappet adjusting pads

228,99 €*

145,18 €*

Número de produto: 213729

XK120, XK140, XK150 e XK150S 3.4 (1949-61) • Mark I 2.4 e 3.4 (1957-59) • Mark II 2.4, 240, 3.4 e 340 (1959-61) • S-Type 3.4 (1963-68) • Mk7 (1950-57) • Mk8 (1956-58) • Tipo C (1951-53) • Tipo D (1954-57)

Junta da cabeça do motor

made from high quality composite material. Bore size: 88.50 mm, Thickness: 0.35", built in thickness: 0.33"

More info...

228,99 €*

145,18 €*

Número de produto: 213728

E-Type 3.8 Série 1 (1961-64) • Mark II 3.8 (1959-67) • XK150 3.8 e XK150S 3.8 (1957-61) • Mk9 (1958-61) • S-Type 3.8 (1963-68) • Mk10 3.8 (1961-64)

Junta da cabeça do motor

'full race', made from high quality composite material. Bore size: 90.5 mm, thickness: 0.64", built in thickness: 0.61"

More info...

228,99 €*

197,54 €*

Número de produto: 318659

E-Type 3.8 Série 1 (1961-64) • Mark II 3.8 (1959-67) • XK150 3.8 e XK150S 3.8 (1957-61) • S-Type 3.8 (1963-68) • Mk10 3.8 (1961-64)

Zylinderkopfdichtsatz
Cylinder head gasket set
Pochette de joint

Conjunto de juntas da cabeça do motor

with modern high quality composite head gasket. Bore size: 88.50 mm, Thickness: 0.35", built in thickness: 0.33" - for vehicles with 'B type' and 'Straight Port' cylinder head

More info...

450,00 €*

Número de produto: 503237

E-Type 3.8 Série 1 (1961-64) • Mark II 3.8 (1959-67) • XK150 3.8 e XK150S 3.8 (1957-61) • Mk9 (1958-61) • S-Type 3.8 (1963-68) • Mk10 3.8 (1961-64)

Conjunto de juntas da cabeça do motor

with high quality 'full race' composite head gasket. Bore size: 90.5 mm, thickness: 0.64", built in thickness: 0.61" - for vehicles with 'B type' and 'Straight Port' cylinder head

More info...

411,54 €*

Número de produto: 505091

E-Type 3.8 Série 1 (1961-64) • Mark II 3.8 (1959-67) • XK150 3.8 e XK150S 3.8 (1957-61) • S-Type 3.8 (1963-68) • Mk10 3.8 (1961-64) • Mk9 (1958-61)

Valve collars

12 piece kit top retainrs, for inlet valve and exhaust valve - made from 6AL4V titanium

More info...

392,57 €*

Número de produto: 548910

E-Type 4.2 Series 1 and 2 (1964-70) • E-Type 5.3 V12 Series 3 (1971-74) • Mark II (1959-69) • Mk10 4.2 (1964-66) • 420G (1966-70) • 420 and Daimler Sovereign (1966-69) • XJ6 Series I, II and III (1968-87) • XJ12 Series I, II and III (1972-92) • Daimler DS420 Limousine and Hearse (1968-92) • XJS 5.3 V12 and 6.0 V12 (1975-96) • XJ40 (XJ) 2.9 and 6.0 V12 (1986-94)

Válvula de admissão

44.5 mm

More info...

33,88 €*

Número de produto: 21103

XK150 (1957-61) • Mark II (1959-69) • E-Type Series 1 e 2 (1961-70) • S-Type 3.4 e 3.8 (1963-68) • Mk10 e 420G (1961-70) • 420 e Daimler Sovereign (1966-69) • XJ6 2.8 Séries I e II (1968-73), 4.2 Séries I e II Modelos carburados para o motor nº 8L64995 e modelos com injeção de combustível para o motor nº 8L50475 (1968-78) e todos os 3.4 Séries II e III (1975-87)

Válvula de admissão

44.5 mm - reproduction

More info...

14,09 €*

Número de produto: 318606

Válvula de escape

made of chrome-nickel-magnesium steel with nitrided surface. Diameter: 41.3 mm

More info...

118,12 €*

Número de produto: 26701

XK140 com cabeçote C-Type (1954-57) • XK150 (1957-61) • Mark II 3.4, 3.8 e 340 (1959-69) • E-Type Series 1 e 2 (1961-70) • S-Type 3.4 e 3.8 (1963- 68 ) • Mk10 e 420G (1961-70) • 420 e Daimler Sovereign (1966-69) • XJ6 Séries I, II e III (1968-87) • Mk7, Mk7M, Mk8 e Mk9 com cabeçote C-Type do motor número D1115 (1952-57)

Válvula de escape

made of chrome-nickel-magnesium steel with nitrided surface. Diameter: 41.3 mm

More info...

20,98 €*

Número de produto: 318604

Válvula de admissão

made from 214N stainless steel. Head diameter: 44.5 mm with 30° seat

More info...

49,49 €*

Número de produto: 207529

XK120 e XK140 (1949-54) • Mark II 2.4 (1959-67) • Mk7 (1951-54)

Válvula de escape

36.5 mms, 45° seat, made from 214N stainless steel

More info...

28,02 €*

Número de produto: 207615

Ventilführung
Valve guide
Guide de soupape
Conduccion de valvul

Guia de válvula

válvula de admissão - em bronze com 0,504" diâmetro exterior e 1,866" de comprimento

More info...

25,00 €*

Número de produto: 213837

XK120, XK140 e XK150 (1949-61) • Mark I (1955-59) • Mark II (1959-69) • E-Type Series 1 e 2 (1961-70) • Mk5 (1948-51) • Mk7, Mk8 e Mk9 (1950-61) • Mk10 (1961-66) • 420G (1966-69) • S-Type 3.4 e 3.8 (1963-68) • 420 e Daimler Sovereign (1966-69) • XJ6 Series I, II e III (1968-87) • Daimler DS420 Pullmann limusine e carro fúnebre (1968-92)

Guia de válvula

válvula de escape - em bronze com 0,507" diâmetro exterior e 1,957" de comprimento

More info...

25,00 €*

Número de produto: 213838

Valve seat insert

inlet valve. Hardened version for lead free applications. Dimensions: OD = 1.85", ID = 1.437", H = 0.394"

More info...

33,68 €*

Número de produto: 511882

3.4 XK engines (1949-73): XK120, XK140 and XK150 3.4 (1949-61) • Mark I 3.4 (1957-59) • Mark II 3.4 and 340 (1959-69) • Mk7, Mk8 and Mk9 (1950-61) • C-Type (1951-53) • D-Type (1954-57) • XKSS (1957) • S-Type 3.4 (1963-68)

Valve seat insert

inlet valve. Hardened version for lead free applications. Dimensions: OD = 1.88", ID = 1.38", H = 0.43"

More info...

33,68 €*

Número de produto: 200395

3.8 and 4.2 XK engines (1959-92): E-Type Series 1 and 2 (1964-70) • Mark II 3.8 (1959-67) • XK150 3.8 (1957-61) • S-Type 3.8 (1963-68) • 420 and Daimler Sovereign (1966-69) • XJ6 4.2 Series I, II and III (1968-87) • Mk 9 (1958-61) • Mk 10 (1961-66) • 420G (1966-70) • Daimler DS420 (1968-92)

Valve seat insert

exhaust, hardened, semi finished. For lead free applications - dimensions: outer diameter: 42,9 mm inner diameter: 33,45 mm heigth: 6,15 mm

More info...

57,54 €*

Número de produto: 216230

XK140 SE with 'C' type cylinder head plus all XK150 (1954-61) • Mark II (1959-69) • E-Type Series 1 and 2 (1961-70) • XJ6 Series I and II (1968-79) • S-Type 3.4 and 3.8 (1963-68)

Vedante de válvula

inlet valve

More info...

8,88 €*

Número de produto: 203584

XK120, XK140 e XK150 (1949-61) • E-Type Series 1 e 2 (1961-70) • Mark I 3.4 (1957-59) • Mark II 3.4, 340 e 3.8 (1959-69) • S-Type ( 1963-68) • 420 e Daimler Sovereign (1966-69) • Mk7, Mk8 e Mk9 (1950-61) • Mk10 (1961-66) • 420G (1966-70) • XJ6 Séries I, II e III (1968- 87) • E-Type V12 Série 3 (1971-74) • XJ12 Série I, II e III (1972-92) • XJS 5.3 e 6.0 V12 (1975-96) • XJ40 (XJ) 6.0 V12 da VIN... 667829 a 708757 (1992-94) • XJS 3.6 (1982-91) e XJS 4.0 com motor AJ6 do número de motor 179549 a 196089 (1992-94) • XJ40 (XJ) 3.2, 3.6 e 4.0 de VIN...500001 a 708757 (1986-94)

Camshafts

256° 'Road' specification - new items, supplied in pairs. Feature: Mounting with 2 and 4 bolts possible

More info...

1 356,36 €*

Número de produto: 207089

All Jaguar fitted with XK engines (1949-92): XK120, XK140 and XK150 (1949-61) • E-Type Series 1 and 2 (1961-70) • Mark I 3.4 (1957-59) • Mark II 3.4, 340 and 3.8 (1959-69) • S-Type 3.4 and 3.8 (1963-68) • 420 and Daimler Sovereign (1966-69) • Mk7, Mk8 and Mk9 (1950-61) • Mk10 (1961-66) • 420G (1966-70) • XJ6 Series I, II and III (1968-87) • Daimler DS420 Limousine and Hearse (1968-92)

Camshafts

Pair of Sports Road Touring camshafts with 272°. Technical data: Power band 1000 to 5700 rmp, valve timing 26/66 and 66/26, valve lift 3.98", cam lift 0.409", valve clearance 0.0118". Feature: Mounti

More info...

1 356,36 €*

Número de produto: 553862

Mahle Camshaft bearing set

tri metal construction with standard size

More info...

204,42 €*

Número de produto: 534310

XK120, XK140 and XK150 (1949-61) • Mark I (1955-59) • Mark II (1959-69) • E-Type Series 1 and 2 (1961-70) • Mk5 (1948-51) • Mk7, Mk8 and Mk9 (1950-61) • Mk10 (1961-66) • 420G (1966-69) • S-Type 3.4 and 3.8 (1963-68) • 420 and Daimler Sovereign (1966-69) • XJ6 Series I, II and III (1968-87) • Daimler DS420 Limousine and Hearse (1968-92)

Kit de suporte para as guias de válvula

including UNC tap and driller

More info...

107,90 €*

Número de produto: 337282

XK120, XK140 e XK150 (1949-61) • E-Type Series 1 e 2 (1961-70) • Mark I 3.4 (1957-59) • Mark II 3.4, 340 e 3.8 (1959-69) • S-Type 3.4 e 3.8 (1963-68) • 420 e Daimler Sovereign (1966-69) • Mk7, Mk8 e Mk9 (1950-61) • Mk10 (1961-66) • 420G (1966-70) • XJ6 Series I, II e III (1968-87)

Pernos e porcas

cylinder head - 3.4 and 3.8 engines less lifting brackets

More info...

478,00 €*

248,00 €*

Número de produto: 479777

Motores sem ganchos de montagem entre os bancos do cabeçote: XK120, XK140 e XK150 (1949-61) • Mk7, Mk8 e Mk9 (1950-61) • E-Type 3.8 Série 1 (1961-64) • Early Mark II 3.4 e 3.8

Pernos e porcas

cylinder head - high grade 8470 chrome moly with a tensile strength of 190.000 psi ensure substantial strength and reduce stretching

More info...

478,00 €*

351,05 €*

Número de produto: 479778

Motores com ganchos de montagem entre os bancos do cabeçote e prisioneiros curtos: E-Type 4.2 Série 1 (1964-68) • E-Type 4.2 Série 2 para motor nº 7R1914 (modelos OTS e FHC) e 7R35388 (modelos 2+2) • tarde Mark II 3.4 e 3.8