Front suspension MKII and DV8
with inner sleeve, inner position, front upper wishbone
Necessário: 4
securing upper wishbone levers to fulcrum shafts
Per wishbone
Necessário: 2
for upper swivel fitted with grease nipple - black
Necessário: 5
shorter - ball joint to upper wishbone
Per ball joint
Necessário: 1
longer - ball joint to upper wishbone
Per ball joint
Necessário: 1
lower wishbone - front suspension
Per wishbone
Necessário: 4
lower wishbone - front suspension
Necessário: 4
lower wishbone - front suspension. Variant with inner sleeve
Per wishbone
Necessário: 2
securing lower wishbone levers to fulcrum shaft
Per wishbone
Necessário: 2
for lower pin cap
Per ball joint. Use with SJ3146/1
Necessário: 4
do braço da suspensão - á frente
Necessário: 2
lower wishbone - front suspension. Modern type, use together with bolt 208080
Necessário: 2
lower wishbone - front suspension. Modern type, use together with bolt 208080
Necessário: 2
lower wishbone - front suspension. Modern type, use together with bolt 208080
Necessário: 2
for lower pin cap
Per ball joint. For original type only
Necessário: 4
on stub axle
Later type..Quote chassis no.
Necessário: 2
at front of front crossmember - aftermarket
Necessário: 2
at rear of front crossmember - aftermarket
Necessário: 2
at rear of front crossmember
Necessário: 2
front suspension
Mark II 3.4, 3.8 and 340 (1959-69)
Necessário: 2
fron suspension
Mark II 2.4 and 240 (1959-69) • Daimler 250 V8 Saloon (1962-69)
Necessário: 2
securing spring seat to lower wishbone
Necessário: 10
securing spring to lower wishbone
Not pointed as original
Necessário: 2
securing shock absorber bracket to spring seat
Necessário: 8
lower shock absorber mounting bracket - length: 47.7 mm
Necessário: 2
lower shock absorber mounting bracket - length: 50.8 mm
Necessário: 2
front shock absorber
Comprises bushes, washers & nuts
Necessário: 2
outer - with track rod ends assembly. Adjustable type suits both sides
Necessário: 1
LH side
Necessário: 1
outer - with track rod ends assembly. Adjustable type suits both sides
Necessário: 1
RH side
Necessário: 1
upper and lower swivel gaiter and track rod end gaiter
Necessário: 2
and pin for centre steering rod end - standard version
Necessário: 2
and pin for centre steering rod end - uprated version
Necessário: 2
securing pin and bush to drop arm & idler lever
Necessário: 2
centre steering rod, RH side. For vehicles without power assisted steering - reconditioned, in exchange
Necessário: 1
centre steering rod, LH side. For vehicles without power assisted steering - reconditioned, in exchange
Not power assisted steering. Pin cannot be changed
Necessário: 1
centre steering rod, RH side. For vehicles with power assisted steering - reconditioned, in exchange
Power assisted steering
Necessário: 1
centre steering rod, LH side. For vehicles with power assisted steering - reconditioned, in exchange
Power assisted steering
Necessário: 1
front anti roll bar - identified by 13/16" inner diameter
Necessário: 2
for anti roll bar bush, outer position with 32 mm outer diameter and 10.3 mm hole diameter
Necessário: 2
for anti roll bar bush, inner position with 32 mm outer diameter and 11.3 mm hole diameter
Necessário: 2
centre - complete unit with track rod ends
Necessário: 1
front suspension
Adjustable, The first step to improving the handling of your Mark II is to fit uprated shock absorbers and, the fitting of either Spax or Koni units is highly recommended. Units are sold individually, but, should be fitted in axle pairs.
Necessário: 2
upper wishbone, front suspension
Necessário: 2
