Interior dos carburadores SU-H6 - XK120 desde Janeiro1952
for 5/16" throttle spindles with 0.010" oversize
Length: 235 mm
Necessário: 1
without vent - with hexagonal brass head
Necessário: 2
with piston
Necessário: 2
fixed type. For standard mixture - marked: RG
Our recommendation
Necessário: 2
fixed type. For standard mixture - marked: WO2
Necessário: 2
fixed type. For standard mixture - marked: RF
Necessário: 2
front carburettor
Necessário: 1
rear carburettor
Necessário: 1
for 5/16" throttle spindles with standard size.
Length: 115 mm
Necessário: 1
throttle spindle. For bodies with worn cast in bushes, useable on SU and Zenith Stromberg carburettors with 5/16" throttle spindle
Necessário: 4
for throttle disc return spring
Necessário: 2
throttle disc
Fixed to the cover band of the starter motor
Necessário: 2
throttle spindle to carburettor spindle
Necessário: 1
Coupling link to throttle spindle and carburettor spindle
Necessário: 2
Coupling link to throttle spindle and carburettor spindle
Necessário: 2
Coupling link to throttle spindle and carburettor spindle
Necessário: 2
with cork glands - for rear carburettor
Necessário: 1
with treated rubber seals - for SU-H type carburettors with fixed needle
Necessário: 1
front thermo carburettor
Necessário: 1
float lid - with hexagonal zinc plated head
Necessário: 2
carburettor. Copy with 2.3/8" diameter
Please use with float lever 3141
Necessário: 2
for SU carburettors - bore: 0.096"
Necessário: 2
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
Superior replacement of needle valve and seat 204291 (ill. 40)
Necessário: 2
float
Fits to float chamber lid 20669 (ill. 38)
Necessário: 2
flutuador - altura do suporte da tampa para suspensão do garfo: 1/4". Só cabe com a tampa original da câmara de flutuação
Necessário: 2
for SU H & HD type carburettor, diameter: 1.7/8" - unsinkable' float, made from Nitrile rubber foam
Necessário: 2
fuel pipe to float chamber lid
Necessário: 2
and spring - inside float chamber lid on SU carburettors
Necessário: 2
float chamber and cast pipe to front carburettor
Necessário: 1
float chamber to rear carburettor
Necessário: 1
banjo bolt to thermo carburettor cast pipe
Necessário: 1
banjo bolt and float chamber to carburettor body
Necessário: 1
cast pipe to thermo carburettor
Necessário: 1
banjo bolt to cast pipe
Necessário: 1
banjo bolt and cast pipe to thermo carburettor
Necessário: 1
for auxiliary enrichment (thermo) carburettor
Necessário: 1
inlet manifold to thermo carburettor
Necessário: 1
for single SU-H4 and SU-H6 type carburettor
Necessário: 2
for single carburettor
Comprising service kit 200202 (ill. 57) plus throttle disc and throttle spindle
Necessário: 2
