Cylinder head - 2.25 litre 4-cylinder Petrol
bare head with 8:1 compression ratio, for leaded fuel - new item with metric threads
Necessário: 1
between temperature sensor and cylinder head
Necessário: 1
water temperature in water rail
Necessário: 1
with 5.7 cm total length
Necessário: 4
with 11.6 cm total length
Necessário: 9
retaining clip to mounting bracket
Necessário: 1
retaining mounting bracket to cylinder head
Necessário: 1
retaining mounting bracket to cylinder head
Necessário: 1
oil pipe to cylinder haead and to engine block- feature: M10x1.5 standard thread
Necessário: 2
exhaust valve, RH cranked
Defender 2.25 litre Petrol with engine suffix 'A' and 'B' (1983-84)
Necessário: 2
exhaust valve, RH cranked
Defender litre Petrol from engine suffix 'C' (1984)
Necessário: 2
inlet valve, LH cranked
Defender 2.25 litre Petrol with engine suffix 'A' and 'B' (1983-84)
Necessário: 2
inlet valve, LH cranked
Defender litre Petrol from engine suffix 'C' (1984)
Necessário: 2
rocker arm adjusting srew
To suffix B (1985 MY)
Necessário: 8
rocker arm
To suffix B (1985 MY)
Necessário: 8
rocker arm
From suffix C (1986 MY)
Necessário: 8
retaining rocker shaft
To suffix B (1985 MY)
Necessário: 1
retaining rocker shaft
From suffix C (1986 MY)
Necessário: 1
retaining support panel
To suffix B (1985 MY)
Necessário: 1
retaining support panel
From suffix C (1986 MY)
Necessário: 1
inlet valve, RH cranked
Defender 2.25 litre Petrol with engine suffix 'A' and 'B' (1983-84)
Necessário: 2
inlet valve, RH cranked
Defender litre Petrol from engine suffix 'C' (1984)
Necessário: 2
exhaust valve, LH cranked
Defender 2.25 litre Petrol with engine suffix 'A' and 'B' (1983-84)
Necessário: 2
exhaust valve, LH cranked
Defender litre Petrol from engine suffix 'C' (1984)
Necessário: 2
inlet and exhaust valve - may replace the genuine fitted double spring
Necessário: 8
From engine number 11H02984C and for use on cylinder heads with exhaust valve seat insert
Necessário: 4
halves
From engine number 11H02984C
Necessário: 16
complete unit with slide rail, roller, bolt and washer
Necessário: 8
Can be fitted if suffering from excessive valve stem or valve rocker wear
Necessário: 8
rocker cover - lower position
Early rock cover with seperate holes for oil filler and breather filter
Necessário: 3
engine breather
Late rock cover with shared hole for breather filter and oil filler
Necessário: 1
rocker cover - upper position
Early rock cover with seperate holes for oil filler and breather filter
Necessário: 3
rocker cover
Late rock cover with shared hole for breather filter and oil filler
Necessário: 1
orange
Early rock cover with seperate holes for oil filler and breather filter
Necessário: 1
oil filler
Early rock cover with seperate holes for oil filler and breather filter
Necessário: 1
engine breather
Early rock cover with seperate holes for oil filler and breather filter
Necessário: 1
retaining plate tappet to cover
Early rock cover with seperate holes for oil filler and breather filter
Necessário: 4
"CLEARANCE"
Early rock cover with seperate holes for oil filler and breather filter
Necessário: 1
engine breather
Early rock cover with seperate holes for oil filler and breather filter
Necessário: 1
Early rock cover with seperate holes for oil filler and breather filter
Necessário: 1
oil filler cap
Early rock cover with seperate holes for oil filler and breather filter
Necessário: 1
Late rock cover with shared hole for breather filter and oil filler
Necessário: 1