Cylinder head - V8 Petrol
inlet manifold - modern Composite specification
Necessário: 1
retaining bracket support ignition leads
Necessário: 1
ignition leads - LH
Necessário: 1
inlet manifold gasket ends - standard specification
Necessário: 2
grey
Necessário: 1
retaining bracket support ignition lead
Necessário: 2
retaining bracket support ignition lead
Necessário: 1
rocker cover to cylinder head - long
Necessário: 4
rocker shaft
Necessário: 4
RH side, made from alloy - use with push rod 369293 (don't use the standard push rod)
Necessário: 8
LH side, made from alloy - use with push rod 369293 (don't use the standard push rod)
Necessário: 8
- front position
Vehicles without power steering and air conditioning
Necessário: 1
- front position
Vehicles with power steering and air conditioning
Necessário: 1
inlet and exhaust valve. Steel type
Necessário: 16
tapped for screw securing dipstick tube bracket
Necessário: 1
Vehicles without air conditioning
Necessário: 14
Vehicles with air conditioning
Necessário: 13
exchange - compression ratio: 8.13:1. Non detoxed variant
Vehicles with engine suffix 14G and 20G
Necessário: 2
exchange. Complete with valve guides, valves and springs
Vehicles with engine suffix 15G, 17G, and 21G
Necessário: 2
exchange - compression ratio: 8.13:1. Detoxed variant with injector tubes
Vehicles with engine suffix 24G
Necessário: 2
lifting bracket to cylinder head
Vehicles without power steering
Necessário: 2
lifting bracket to cylinder head
Vehicles with air conditioning and power steering
Necessário: 3
Vehicles with air conditioning and power steering
Necessário: 3
made from sheet metal. Bore size: 89.9 mm, thickness: 0.2"
Necessário: 2
classic soft material gasket on metal layer. Bore size: 89.9 mm, thickness: 0.43"
Necessário: 2
Composite specification with partial serigraph covering. Bore size: 88.9 mm + 0.5 mm, thickness: 0.47", built in thickness: 0.47"
Necessário: 2
stainless steel, diameter: 1.34" - for 8.13:1 compression engines
Necessário: 8
stainless steel, diameter: 1.57"- for 8.13:1 compression engines
Necessário: 8
with tin head gaskets
Necessário: 1
with soft material head gaskets on metal layer
Necessário: 1
Necessário: 1
non-setting gasket and jointing compound
Necessário: 1
Conteúdo: 80 ml (199,88 €* / 1000 ml)
