Axle casing and differential - Rover axle
rear - Rover typ
Serie II, IIA 88 models
Necessário: 1
rear - Rover typ
Serie II, IIA 109 models
Necessário: 1
rear - Rover typ
Serie III 88 models
Necessário: 1
- short
Rover type axle
Bolt typ fixing
Necessário: 4
- long
Rover typ axle
bolt typ fixing
Necessário: 6
differential to axle casing - feature: 3/8"-24 UNF thread and 1.3/4" length
Rover typ axle, stud typ fixing
Necessário: 6
Serie II, IIA and III to vehicle no. 14269
Necessário: 1
Early Rover typ axles
Necessário: 1
differential pinion
Vehicles to axle suffix "A"
Necessário: 1
for pinion
Vehicles from axle suffix "B"
Necessário: 1
retaining bearing cap - BSF
Serie II, IIA and Serie III to suffix "G", 109 V8 to suffix "C"
Necessário: 4
retaining bearing cap - metric
Serie III from suffix "H", 109 V8 from suffix "D"
Necessário: 4
for bearing adjustment
Serie II, IIA and Serie III to suffix "G", 109 V8 to suffix "C"
Necessário: 2
for bearing adjustment
Serie III from suffix "H", 109 V8 from suffix "D"
Necessário: 2
Serie II, IIA und Serie III bis Kennbuchstabe "G", 109er V8 bis Kennbuchstabe "C"
Necessário: 2
Serie III from suffix "H", 109 V8 from suffix "D"
Necessário: 2
Necessário: 2
differential pinion, outer
Vehicles to axle suffix "A"
Necessário: 1
differential pinion, outer
Vehicles from axle suffix "B"
Necessário: 1
outer pinion bearing
Vehicles to axle suffix "A"
Necessário: 1
outer differential pinion bearing
Vehicles from axle suffix "B"
Necessário: 1
pinion bearing, flange end - thickness: 0.003"
Serie II, IIA
pinion bearing, flange end - thickness: 0.005"
Serie II, IIA
pinion bearing, flange end - thickness: 0.010"
Serie II, IIA
pinion bearing, flange end - thickness: 0.020"
Serie II, IIA
flange end bearing - thickness: 0.060"
Serie III
pinion, rear position - 0.072"
Serie II, IIA and III
pinion, rear position - 0.074"
Serie II, IIA and III
pinion, rear position - 0.076"
Serie II, IIA and III
pinion, rear position - 0.081"
Serie II, IIA and III
differential end cover
Serie II, IIA
Necessário: 3
differential pinion
Serie II, IIA
Necessário: 1
differential input shaft - feature: 4 internal splines
Necessário: 1
differential
Serie II, IIA
Necessário: 1
differential - 3/4"-14 BSPT thread with 5/8 "AF square socket
Serie III
Necessário: 1
Serie III ab vehicle no. 14270
Necessário: 1
