Internos eléctricos - Buzina, relés e interruptores
2 fuse variant with 5 screw-in terminals. SF6 type without cover
Necessário: 1
35 Ampere with 32 mm overall length and 6.2 mm diameter. Glass type
Necessário: 1
50 Ampere with 32 mm overall length and 6.2 mm diameter. Glass type
Necessário: 1
Fuse box to bulkhead panel
Necessário: 2
for C39 and C40 dynamo. RB106 type with 5 screw-in terminals
Necessário: 1
control box cover - sandblasted and painted silver
Necessário: 1
control box
Necessário: 1
Control box to bulkhead panel
Necessário: 2
Control box to bulkhead panel
Necessário: 2
replica of the FL5 flasher relay with 3 screw-in terminals and round housing
Alternatives
Necessário: 1
FL5 flasher relay with 3 terminals and round housing
Necessário: 1
Flasher relay to bulkhead panel
Necessário: 1
Flasher relay to bulkhead panel
Necessário: 1
low note - alloy cast horn with domed cover. 12 volt with 2 wire terminals
Necessário: 1
high note - alloy cast horn with domed cover. 12 volt with 2 wire terminals
Necessário: 1
for original horn - new item
Alternatives
Necessário: 2
for original horn - used item
Alternatives
Necessário: 2
for LH horn
Necessário: 1
for RH horn
Necessário: 1
Horn bracket to front extension
Necessário: 4
stop light and rear indicator. Reproduction of the Lucas type DB10 with modern electronics and 8 screw terminals
1500
Necessário: 1
relay to bulkhead panel
1500
Necessário: 2
hydraulic switch with screw-in terminals and 1/8" x 27 NPTF thread
Necessário: 1
headlamps - round FS22/1 type with screw-in terminals
Necessário: 1
foot dipper switch - LHD only
1600, 1622, Twin Cam and De Luxe
Necessário: 1
foot dipper switch - RHD only
1600, 1622, Twin Cam and De Luxe
Necessário: 1
Bracket to bulkhead panel
Necessário: 1
Bracket to bulkhead panel
Necessário: 2
Retaining clip to dipper switch bracket
Necessário: 1
Retaining clip to dipper switch bracket
Necessário: 1
SB40 type with 4 screw terminals - overdrive, starter motor, ignition, horn, alternator and heater motor
Optional extra
Necessário: 1
