Block components 848 cc A series
for higher oil pressure
use together with spring 9240
Necessário: 1
for higher oil pressure
use together with ball 327229
Necessário: 1
alternative use part no. 316087
Necessário: 1
Only the largest bearing is required, the other camshaft positions run without bearings directly in the engine block
Necessário: 1
oil gallery. Diameter: 1/2", total height: 3/8"
alternatives
Necessário: 2
for water drain tap - 3/32" thick
alternatives
Necessário: 1
for water drain tap - 1/16" thick
alternatives
Necessário: 1
alternative to water drain tap 5411
Necessário: 1
for blanking plug 292851
if fitted
Necessário: 1
with breather pipe
early models
could be replaced by side cover 8253
Necessário: 1
oil pipe
only on cars without if oil pressure switch 14956
Necessário: 1
without dipstick tube or if tube 8294 is fitted
Necessário: 1
dipstick - nylon
use together with dipstick 306404
Necessário: 1
use together with dipstick tube 327237
Necessário: 1
dipstick - metal
use together with dipstick 306704
Necessário: 1
filter to block, use with oil filter element
use bolt 6511 if not available
Necessário: 2
filter to block, use with oil filter element
replaces stud 298337
Necessário: 2
cylinder head - short
5 if stud 306181 to hold coil bracket is not fitted
Necessário: 4
cylinder head - medium
if coil bracket fitted to cylinder head
Necessário: 1
improved
fitted without washer 212195
Necessário: 9
use if no mechanical fuel pump is fitted
Necessário: 1
main bearing cap
Necessário: 6
distributor drive, variant without groove for 'O' ring
early cars
Necessário: 1
distributor drive, variant with groove for 'O' ring
with groove for 'O' ring
Necessário: 1
engines without timing chain tensioner
Necessário: 1
engines with timing chain tensioner
Necessário: 1
non-setting gasket and jointing compound
Conteúdo: 80 ml (199,88 €* / 1000 ml)
BMC green
Conteúdo: 400 ml (72,50 €* / 1000 ml)
matt black
Conteúdo: 400 ml (68,18 €* / 1000 ml)
