Cylinder head Cooper 997 cc and Cooper 998 cc A series
with breather
early cars
Necessário: 1
black plastic, not vented
early cars
use with vented rocker cover 292731 only
Necessário: 1
without breather
Alloy Rocker covers
Necessário: 1
without breather
from conversions, looks like new
Necessário: 1
black plastic, with breather
Necessário: 1
genuine type with 14,28 mm diameter
alternatives
Necessário: 1
reproduction with 14,28 mm diameter
alternatives
Necessário: 1
with threat for rocker shaft adjusting screw
Necessário: 1
for adjusting screw
could be used alternative for 8612
Necessário: 1
without threat for rocker shaft adjusting screw
Necessário: 3
forged
could be replaced by rocker arm 203398 or 7020
Necessário: 8
in rocker arm
for rocker arm 292898
Necessário: 8
pressed steel - used item
could be replaced by rocker arm 7020
Necessário: 8
rocker arm - 1/4" UNF
for rocker arm 292828 and 203398
Necessário: 8
rocker arm adjusting screw - 1/4" UNF
for rocker arm 292828 and 203398
Necessário: 8
sintered
could be used as replacement for rocker arms 298828 and 203398
Necessário: 8
rocker arm - 5/16" UNF
for rocker arm 7020
Necessário: 8
rocker arm adjusting screw - 5/16" UNF
for rocker arm 7020
Necessário: 8
bronce, Inlet and exhaust valve
alternative for 8238
Necessário: 8
diameter: 29,4 mm length: 87,4 mm
997 cc
Indentification: large collet groove
Necessário: 4
diameter: 29,3 mm length: 87,4 mm
998 cc, engine no. 9FA/SA/H101 bis H1034 (minus H407) 9FD/SA/L101 bis L1580
Indentification: large collet groove
Necessário: 4
diameter: 31,0 mm length: 87,3 mm
998 cc, engine no. 9FA/SA/H1035 to H4999 (plus H407) 9FD/SA/H101 to H33660 9FD/SA/L101 on
Indentification: large collet groove
Necessário: 4
diameter: 25,5 mm length: 86,9 mm
Indentification: large collet groove
Necessário: 4
inner
only 998 cc
more valve springs
Necessário: 8
modern alternative to 'O' rings 8625
Necessário: 8
top
for valves with large collet groove
Necessário: 8
pair
for valves with large collet groove
Necessário: 8
valve cotter
for valves with large collet groove
Necessário: 8
inlet valve, oversize + 0.0625"
semi finished
Necessário: 4
exhaust valve
for unleaded fuel, semi finished
Necessário: 4
exhaust valve, oversize + 0.0625"
for unleaded fuel, semi finished
Necessário: 4
brass, for oil hole
Necessário: 1
for bypass hose
also used by cast iron water pumps
Necessário: 1
classic soft material gasket on metal layer
Necessário: 1
classic copper gasket on metal layer
alternative for gasket 204045
Necessário: 1
only used if no heating tap is mounted
Necessário: 1
for heater tap or blanking plate
Necessário: 2
non-setting gasket and jointing compound
Conteúdo: 80 ml (199,88 €* / 1000 ml)
with soft material head gasket on metal layer
Necessário: 1
with copper head gasket on metal layer
alternative for gasket set 12625
Necessário: 1
