Engine mountings
upper, right
up to approx. 1962
Necessário: 1
engine steady rod, engine end
up to approx. 1962
Necessário: 1
in rubber bush, engine end
up to approx. 1962
Necessário: 1
upper, right
approx. 1962 on upto 1992
auxiliary engine steady rod kits
Necessário: 1
upper, right - stainless steel polished, ready mounted with polyurethane bushings
approx. 1962 on upto 1992 (not 1275 cc 1990 on)
Option
Necessário: 1
upper, right
• Automatic, A-A2S7S-708693 and M-A2S4S361001on • 1275 ccm 1990 on
Necessário: 1
upper, right - stainless steel polished, ready mounted with polyurethane bushings
• Automatic, A-A2S7S-708693 and M-A2S4S361001on • 1275 ccm 1990 on
Necessário: 1
engine steady rod, engine end
approx. 1962 on
Necessário: 2
for 1 eye at the engine steady rod - uprated version with cone sleeves
approx. 1962 on
Necessário: 2
engine steady rod - 2-piece bush with inner sleeve with 5/16" inner diameter
approx. 1962 on
Necessário: 2
engine steady rod, engine end, one piece with steel sleeve
from VIN...XD172842 (1996-2000) - fits also to earlier cars
Necessário: 1
engine steady rod to engine
up to approx. 1970
Necessário: 1
between support bracket and spacer plate
up to approx. 1970
Necessário: 1
between engine steady rod and engine
up to approx. 1970
Necessário: 1
short, bracket to engine
up to approx. 1970
Necessário: 1
for screw and bolt bracket to engine
up to approx. 1970
Necessário: 2
engine steady rod to engine
approx. 1971 on
repair kits for engine steady rod if bolts break off
Necessário: 1
for screw and bolt bracket to engine
approx. 1971 on
Necessário: 2
for 1 eye at the engine steady rod - uprated version with cone sleeves
Necessário: 2
engine steady rod - 2-piece bush with inner sleeve with 5/16" inner diameter
Necessário: 2
engine steady rod, bulkhead end, one piece with steel sleeve
from VIN...XD172842 (1996-2000) - fits also to earlier cars
Necessário: 1
shouldered, engine steady rod to bulkhead
upto approx. 09/1969
Necessário: 1
for stud engine steady rod to bulkhead
up to approx. 09/1969
Necessário: 2
for stud engine steady rod to bulkhead
up to approx. 09/1969
Necessário: 2
engine steady rod to bulkhead
approx. 09/1969 on
Necessário: 1
for bolt engine steady rod to bulkhead
approx. 09/1969 on
Necessário: 1
for bolt engine steady rod to bulkhead
approx. 09/1969 on
Necessário: 1
for bolt engine steady rod to bulkhead
approx. 09/1969 on
Necessário: 1
left, on gearbox
early cars, not Cooper
later replaced by mounting bracket 305671
Necessário: 1
enginebracket to gearbox, left
not used if enginebracket 469622 is fitted on early cars
Necessário: 1
left, on gearbox
Automatic transmission
Necessário: 1
com transmissão manual (1959-2000)
Necessário: 2
for screw engine mounting to subframe
Necessário: 4
for screw engine mounting to subframe
not used if mounting 306453 is fitted
Necessário: 4
lower left rear to gearbox
optional application
Necessário: 1
engine steady rod lower left to gearbox
optional application
Necessário: 1
lower left to gearbox
optional application
Necessário: 1
lower right rear to clutch housing
optional application
Necessário: 1
engine steady rod lower right to clutch case
optional application
Necessário: 1
lower left to clutch case
optional application
Necessário: 1
engine steady rod lower right front
A plus series
Necessário: 1
lower right front
998 cc A plus series
Necessário: 1
lower, RH front (on clutch casing)
Mini with 1275 cc A-plus Series engine (1990-2000)
Necessário: 1
engine steady rod to bracket and subframe
for lower engine steady rods, quantity per eye
Necessário: 2
small
for lower engine steady rods, quantity per eye
Necessário: 2
large
for lower engine steady rods, quantity per eye
Necessário: 2
engine steady rod
for lower engine steady rods, quantity per eye
Necessário: 4
lower engine steady rod to gearbox - 2-piece bush with inner sleeve with 3/8" inner diameter
Necessário: 2
in bush
for lower engine steady rods, quantity per eye
Necessário: 2
for lower engine steady rods, quantity per eye
Necessário: 2
for lower engine steady rods, quantity per eye
Necessário: 2
on bulkhead for engine stabilizer - heavy duty variant
Necessário: 1
engine steady rod to crossmember - single line brake system
upto 1975
Necessário: 1
engine steady rod to crossmember - dual line brake system
1976-1988
Necessário: 1
engine stabilizer to crossmember - dual line brake system with brakke servo
1989 on
Necessário: 1
master brake cylinder and support bracket to bulkhead crossmember
Necessário: 1
strenthening support bracket to crossmember
to (V)396448
Necessário: 1
strenthening support bracket to crossmember
(V) 396449 on
Necessário: 1
