Internal electrics - horn, relays and switches
com botão de arranque para o motor de arranque - modelo 2ST
Necessário: 1
starter motor - no push button
Alternatives
Necessário: 1
2 fuse variant with 5 screw-in terminals. SF6 type without cover
TR2 and TR3, TR3A to TS60000
Necessário: 1
TR3A da TS60001 e todas as TR3B, TR4 e TR4A (1959-67)
Necessário: 1
TR3A da TS60001 e todas as TR3B, TR4 e TR4A (1959-67)
Necessário: 1
TR3A da TS60001 e todas as TR3B, TR4 e TR4A (1959-67)
Necessário: 1
35 Ampere with 32 mm overall length and 6.2 mm diameter. Glass type
50 Ampere with 32 mm overall length and 6.2 mm diameter. Glass type
for C39 and C40 dynamo. RB106 type with 5 screw-in terminals
TR2 and TR3, TR3A to TS60000
Necessário: 1
for C40 dynamo - with lucar terminals, type: RB603
TR3A from TS60001, TR3B, TR4 and TR4A
Necessário: 1
replica of the FL5 flasher relay with 3 screw-in terminals and round housing
Alternatives
Necessário: 1
FL5 flasher relay with 3 terminals and round housing
Necessário: 1
low note - alloy cast horn with domed cover. 12 volt with 2 wire terminals
TR2, TR3, TR3A and TR3B
Necessário: 1
high note - alloy cast horn with domed cover. 12 volt with 2 wire terminals
TR2, TR3, TR3A and TR3B
Necessário: 1
for original horn - new item
TR2, TR3, TR3A and TR3B
Necessário: 2
for original horn - used item
TR2, TR3, TR3A and TR3B
Necessário: 2
low note - reproduction of Lucas 9H windtone horn with two terminals. 12 volt
Plastic replacement for all original horns. Require mounting bracket 21074 (ill. 24)
Necessário: 1
high note - reproduction of Lucas 9H windtone horn with two terminals. 12 volt
Plastic replacement for all original horns. Require mounting bracket 21074 (ill. 24)
Necessário: 1
horn - supplied in pairs
For replacement horns 2820 and 2821 (ill. 23)
Necessário: 1
hydraulic switch with screw-in terminals and 1/8" x 27 NPTF thread
TR2, TR3 to TS13045 - cars with Lockheed brakes
Necessário: 1
hydraulic switch with lucar terminals and 1/8" x 27 NPTF thread
TR2, TR3 to TS13045 - cars with Lockheed brakes
Necessário: 1
hydraulic switch with two lucar terminals and 3/8"-24 UNF thread with cone seat on end
TR3 from TS13045, TR3A and TR3B, TR4 to CT26929 - cars with Girling brakes
Necessário: 1
mechanical
TR4 from CT26930, TR4A
- fixed at pedal box
Necessário: 1
brake light switch
TR4 from CT26930, TR4A
- fixed at pedal box
Necessário: 1
TR4 from CT26930, TR4A
- fixed at pedal box
Necessário: 1
overdrive isolation
Overdrive models only
Necessário: 2
on overdrive switch
Overdrive models only
Necessário: 2
6RA type with 4 Lucar terminals - overdrive, starter motor, ignition, horn, alternator and heater motor
Necessário: 1
relay to body
Overdrive models only
Necessário: 2
6RA type with 4 Lucar terminals - overdrive, starter motor, ignition, horn, alternator and heater motor
TR4A (1965-67)
Necessário: 1
6RA type with 4 Lucar terminals - overdrive, starter motor, ignition, horn, alternator and heater motor
TR4A (1965-67)
Necessário: 1
for temperature gauge - electrical
TR4 and TR4A
Necessário: 1
headlamps - round FS22/1 type with screw-in terminals
TR2 and TR3, TR3A to TS60000
Necessário: 1
dip switch to bulkhead
TR2 to TS13045
Necessário: 2
dip switch to bulkhead
TR2 from TS13046,TR3, TR3A to TS60000
Necessário: 2
TR2 from TS13046,TR3, TR3A to TS60000
Necessário: 2
headlamps - round 21SA type with screw terminals
TR3A from TS60001, TR3B and early TR4
Necessário: 1
dip switch to bulkhead
TR3A fromTS60001 and TR3B and also early TR4 RHD
Necessário: 2
dip switch to bracket
TR3A fromTS60001 and TR3B and also early TR4 LHD
Necessário: 2
TR3A fromTS60001 and TR3B and also early TR4 LHD
Necessário: 2
headlamps - square 103SA type with lucar terminals
Late TR4, TR4A
Necessário: 1
dip switch to bulkhead resp. to bracket
Late TR4, TR4A
Necessário: 2
dip switch - new item
TR4 and TR4A - LHD only
Necessário: 1
dip switch - used item
TR4 and TR4A - LHD only
Necessário: 1
bracket to bulkhead
TR4 and TR4A - LHD only
Necessário: 2
bracket to bulkhead
TR4 and TR4A - LHD only
Necessário: 2
12 volt, for positive and negative earthed cars without cut-off relay, complete with fitting instructions
Necessário: 1
