Gearbox - outer (1957-75)
with bell housing
500 R (1972-75)
Necesarios: 1
gearbox to engine - length: 68 mm
500 N, D, F, L and R
Necesarios: 2
gearbox to engine - length: 62 mm
500 N, D, F, L and R
Necesarios: 2
retaining engine to gearbox
500 N, D, F, L and R
Necesarios: 4
retaining engine to gearbox
500 N, D, F, L and R
Necesarios: 4
retaining engine to gearbox
500 N, D, F, L and R
Necesarios: 4
gearbox housing
500 N, D, F, L and R
Necesarios: 1
bell housing
500 N, D, F, L und R
Necesarios: 1
retaining flywheel cover
500 N, D, F, L and R
Necesarios: 3
bell housing to gearbox casing - length: 95 mm
500 N, D, F, L and R
Necesarios: 4
bell housing to gearbox casing - length: 85 mm
500 N, D, F, L and R
Necesarios: 2
gearbox to bell housing
500 N, D, F, L and R
Necesarios: 5
gearbox to bell housing
500 N, D, F, L and R
Necesarios: 5
gearbox
500 N, D, F, L and R
Necesarios: 1
gearbox casing - for selector shaft stop
500 N, D, F, L and R
Necesarios: 1
retaining side cover gearbox
500 N, D, F, L and R
Necesarios: 2
retaining side cover gearbox
500 N, D, F, L and R
Necesarios: 2
retaining side cover gearbox
500 N, D, F, L and R
Necesarios: 2
retaining side cover gearbox
500 N, D, F, L and R
Necesarios: 2
between gearbox casing and gearbox extension
500 N, D, F, L and R
Necesarios: 1
gearbox extension to casing
500 N, D, F, L and R
Necesarios: 2
gearbox extension to casing
500 N, D, F, L and R
Necesarios: 2
between gearbox casing and gearbox extension
500 N, D, F, L and R
Necesarios: 1
gearbox extension to casing
500 N, D, F, L and R
Necesarios: 5
retaining end part gearbox
500 N, D, F, L and R
Necesarios: 5
retaining end part gearbox
500 N, D, F, L und R
Necesarios: 5
retaining end part gearbox
500 N, D, F, L and R
Necesarios: 2
gearbox extension
500 N, D, F, L and R
Necesarios: 1
first motion shaft. Complete unit with oil seal and bronce bearing
500 F, L and R
Necesarios: 1
gearbox, front
500 F, L, and R
Necesarios: 1
gearbox, front
500 N, D, F, L and R
Necesarios: 1
gearbox, front
500 N, D, F, L and R
Necesarios: 1
retaining locating bush, front
500 N, D, F, L and R
Necesarios: 1
assembly - reconditioned, in exchange
500 N, D, F, L and R
Necesarios: 1
gear lever
500 N, D, F, L and R
Necesarios: 1
retaining gear lever
500 N, D, F, L and R
Necesarios: 1
500 N, D, F, L and R
Necesarios: 1
retaining gear lever housing
500 N, D, F, L and R
Necesarios: 2
retaining gear lever housing
500 N, D, F, L and R
Necesarios: 2
front
500 N, D, F, L and R
Necesarios: 1
connecting gear lever with selctor fork rods
500 N, D, F, L and R
Necesarios: 1
selector shaft
500 N, D, F, L and R
Necesarios: 1
selector shaft
500 N, D, F and L
Necesarios: 2
gear lever to selector shaft
500 N, D, F, L and R
Necesarios: 1
selector shafts
500 N, D, F, L and R
Necesarios: 1
and nut - connecting rod to selector shaft
500 N, D, F, L and R
Necesarios: 1
without mounting bracket
500 D, F, L and R
Necesarios: 1
without front oil seal
500 N, D, F, L and R
Necesarios: 1
speedo cable - indntified by 16 teeth
500 F and L
Necesarios: 1
speedo cable - identified by 15 teeth
500 R
Necesarios: 1
angle drive - set of two pinons with 15 teeth each
500 R
Necesarios: 1
spedpmeter pinion
500 F and L
Necesarios: 1
retaining speedo drive
500 N, D, F, L and R
Necesarios: 1
retaining speedo drive
500 N, D, F, L and R
Necesarios: 1
retaining speedo drive
500 N, D, F, L and R
Necesarios: 1
