Diferencial
3.31:1 (engranaje 13/43) Forjadas con acero cromo molibdeno de alto grado, alta precisión togging (sistema suizo oerlikon), probadas (incluso el ruido) y finalmente enviadas en juegos inseparables. Protegidos con una película de aceite. Corona y piñón para el eje IRS clásico de Jaguar.
Necesarios: 1
3.54:1 (dentado 13/46) - Versión para diferencial tipo 1
Necesarios: 1
4.1:1 ratio (teeth: 10/41)
3HA type axles were fitted to early 2.4 models. 4HA type axles were fitted to late 2.4 models and all 240/3.4/3.8 and 340 models. A limited slip differential was standard on 3.8 models but optional on other models. Indification tags on the rear casing show the final drive ration as a fraction e.g. 43/13 representd 3.31:1. Models fitted with limited slip differentials are tagged with the letters "BP-L". Hups, hup caps, spinners and associated items are listed in the Road Wheels section. The crown wheel and pinion fitted to many models may be the same as originally supplied. Please check.
Necesarios: 1
4.55:1 (11/50 teeth)
3HA type axles were fitted to early 2.4 models. 4HA type axles were fitted to late 2.4 models and all 240/3.4/3.8 and 340 models. A limited slip differential was standard on 3.8 models but optional on other models. Indification tags on the rear casing show the final drive ration as a fraction e.g. 43/13 representd 3.31:1. Models fitted with limited slip differentials are tagged with the letters "BP-L". Hups, hup caps, spinners and associated items are listed in the Road Wheels section. The crown wheel and pinion fitted to many models may be the same as originally supplied. Please check.
Necesarios: 1
differential pinion, outer - please note: this bearing is needed thor the crown wheel and pingion 208206 and 208207 to suit an outside diameter 2.6875" (68.263 mm)
Necesarios: 1
couronne, position avant
Necesarios: 1
propshaft to differential - please note: this flange is needed thor the crown wheel and pingion 208206 and 208207 to suit an outside diameter 2.6875" (68.263 mm)
Necesarios: 1
entrada diferencial - versión de cuero, diámetro interior de 39 mms.
Necesarios: 1
differential
Necesarios: 2
planet gear
Necesarios: 1
crown wheel to differential carrier
For non ribbed differential assemblies only
Necesarios: 5
differential - 10 teeth
"powr-lok" differential
Necesarios: 4
differential - flat type
Necesarios: 4
differential - dished type
Necesarios: 2
differential oil drain and oil filler
Necesarios: 1
differential carrier (inner bearing)
Necesarios: 2
rear axle shaft - genuine leather type
Necesarios: 2
axle shaft - rubber replacement
Necesarios: 2
Necesarios: 2