Cigüeñal 848cc - Serie a
exchange - identification: 1.375" diameter tail size on primary gear
upto engine 8AM/U/H551624
could be replaced by crankshaft 789 with 1.1/2" tail size shaft, but needs modification
Necesarios: 1
exchange - identification: 1.5" tail size on primary gear
from engine 8AM/U/H551625
casting: 12A670
Necesarios: 1
standard size. Identification: 1.185" journal width
approx. to 1969.
Identification: 1.185" journal width
Necesarios: 1
+ 0.010" over size. Identification: 1.185" journal width
approx. to 1969.
Identification: 1.185" journal width
Necesarios: 1
+ 0.020" over size. Identification: 1.185" journal width
approx. to 1969.
Identification: 1.185" journal width
Necesarios: 1
+ 0.030" over size. Identification: 1.185" journal width
approx. to 1969.
Identification: 1.185" journal width
Necesarios: 1
+ 0.040" over size. Identification: 1.185" journal width
approx. to 1969.
Identification: 1.185" journal width
Necesarios: 1
+ 0.050" over size. Identification: 1.185" journal width
approx. to 1969.
Identification: 1.185" journal width
Necesarios: 1
+ 0.060" over size. Identification: 1.185" journal width
approx. to 1969.
Identification: 1.185" journal width
Necesarios: 1
standard size. Identification: 1.064" journal width
approx. from 1969.
Identification: 1.064" journal width
Necesarios: 1
+0.010" over size. Identification: 1.064" journal width
approx. from 1969.
Identification: 1.064" journal width
Necesarios: 1
+0.020" over size. Identification: 1.064" journal width
approx. from 1969.
Identification: 1.064" journal width
Necesarios: 1
+ 0.030" over size. Identification: 1.064" journal width
approx. from 1969.
Identification: 1.064" journal width
Necesarios: 1
+ 0.040" over size. Identification: 1.064" journal width
approx. from 1969.
Identification: 1.064" journal width
Necesarios: 1
+ 0.060" over size. Identification: 1.064" journal width
approx. from 1969.
Identification: 1.064" journal width
Necesarios: 1
+ 0.003"
Necesarios: 1
crankshaft - with +0.005" oversize
Necesarios: 1
+ 0.0075"
Necesarios: 1
crankshaft - with +0.010" oversize
Necesarios: 1
oil feed type, for 1.375" shaft
upto "Deva" type.
could be replaced by Deva type Primary gear 343525 but need some modification
Necesarios: 1
for primary gear 13669 - engine site
upto "Deva" type.
could be replaced by Deva type Primary gear 343525 but need some modification
Necesarios: 1
for primary gear 13669 - flywheel site
upto "Deva" type.
could be replaced by Deva type Primary gear 343525 but need some modification
Necesarios: 1
Deva type, for 1.3/8" shaft
upto engine 8AM/U/H551624
Necesarios: 1
for primary gear 343525 - engine site
upto engine 8AM/U/H551624
Necesarios: 1
for primary gear 343525 - flywheel site
upto engine 8AM/U/H551624
Necesarios: 1
primary gear 343525 to 'C' type clip
upto engine 8AM/U/H551624
Necesarios: 1
'C' type
use with primary gears 13669 & 343525
Necesarios: 1
0.123" - 0.125"
use with primary gears 13669 & 343525. Quantity as required
0.125" - 0.127"
use with primary gears 13669 & 343525. Quantity as required
0.127" - 0.129"
use with primary gears 13669 & 343525. Quantity as required
0.129" - 0.131"
use with primary gears 13669 & 343525. Quantity as required
for 1.1/2" shaft
from engine 8AM/U/H551625
Necesarios: 1
for Primary gear 215876 - engine site
from engine 8AM/U/H551625
Necesarios: 1
primary gear 215876 to 'C' type clip
from engine 8AM/U/H551625
Necesarios: 1
'C' type - for primary gear 215876
from engine 8AM/U/H551625
Necesarios: 1
0.110" - 0.112"
for Primary gear 215876. Quantity as required
0.112" - 0.114"
for Primary gear 215876. Quantity as required
0.114" - 0.116"
for Primary gear 215876. Quantity as required
0.116" - 0.118"
for Primary gear 215876. Quantity as required
0.118" - 0.120"
for Primary gear 215876. Quantity as required
front
Necesarios: 1
fitted together with tensioner rings 9308
could be replaced by sprocket 1156
Necesarios: 1
made from rubber
could be replaced by sprocket 1156
Necesarios: 2
uprated single row endless chain with 52 pitches
Necesarios: 1
Necesarios: 1
standard, 4 ring type
use piston set 327557 if not available
Necesarios: 4
estándar, para pistones de 4 aros
Necesarios: 1
estándar, para pistones de 5 aros
Necesarios: 1
+ 0,020", para pistones de 5 aros
Necesarios: 1
+ 0.030", para pistones de 5 aros
Necesarios: 1
+ 0.040", para pistones de 5 aros
Necesarios: 1
+ 0.060", para pistones de 5 aros
Necesarios: 1
Necesarios: 4
Necesarios: 1
